当前位置: 主页 > 新闻中心 > 行业新闻 >

JTM8120,JTM8120AThe devices are USB dedicated charging port

时间:2015-09-06 16:40来源:未知 作者:oumao18 点击:
目录 1. 产品概述 2. 产品特点 3. 应用范围 4. 产品封装图 5. 电路原理图 6. 产品PDF文档 7. 功能概述 8 . 相关产品 一 , 产品概述( General Description) The devices are USB dedicated charging port (DCP) controllers. A
目录
1.产品概述                       2.产品特点
3.应用范围                       4.产品封装图
5.电路原理图                    6.产品PDF文档 
7.功能概述                        8
.相关产品

,产品概述(General Description)         
     The devices are USB dedicated charging port (DCP) controllers. An auto-detect feature monitors USB data line voltage, and automatically provides the correct electrical signatures on the data lines to charge compliant devices among the following dedicated
charging schemes:
1. Divider 1 DCP, required to apply 2.7 V and 2.7 V
on the D+ and D- Lines respectively
2. BC1.2 DCP, required to short the D+ Line to the
D– Line
3. Chinese Telecom Standard YD/T 1591-2009
Shorted Mode, required to short the D+ Line to the
D– Line
4. 1.2 V on both D+ and D– Lines

.产品特点(Features)

Supports USB DCP Shorting D+ Line to D–
Line per USB Battery Charging Specification,
Revision 1.2 (BC1.2)
Supports Shorted Mode (Shorting D+ Line to
D- Line) per Chinese Telecommunication
Industry Standard YD/T 1591-2009
Supports USB DCP Applying 2.7 V on D+ Line
and 2.7 V on D- Line
Supports USB DCP Applying 1.2 V on D+ and
D– Lines
Automatically Switch D+ and D- Lines
Connections for an Attached Device
Dual USB Port Controller
(JTM8120A)
Single USB Port Controller
(JTM8120)
Operating Range: 4.5 V to 5.5 V
Available in SOT23-6 Package


,应用范围 (Applications)
Vehicle USB Power Charger
AC-DC Adapter with USB Port
Other USB Charger


,产品封装图 (Package)

NO. NAME TYPE(1) DESCRIPTION
1 DP1 I/O Connected to the D+ or D– line of USB connector, provide the correct voltage with attached portable
equipment for DCP detection.
2 GND G Ground connection
3 DP2 I/O Connected to the D+ or D– line of USB connector, provide the correct voltage with attached portable
equipment for DCP detection.
4 DM2 I/O Connected to the D+ or D– line of USB connector, provide the correct voltage with attached portable
equipment for DCP detection
5 IN P Power supply. Connect a ceramic capacitor with a value of 0.1-μF or greater from the IN pin to GND as
close to the device as possible.
6 DM1 I/O Connected to the D+ or D– line of USB connector, provide the correct voltage with attached portable
equipment for DCP detection
(责任编辑:oumao18)
顶一下
(0)
0%
踩一下
(0)
0%
------分隔线----------------------------
尚未注册畅言帐号,请到后台注册
栏目列表
推荐内容