2.6W Stereo Audio Amplifier CXAR41278 mute the output when Mute is activated. For the low current consumption applications, the SHDN mode is supported to disable the CXAR41278 when it is idle. The cur

   产品概述 返回TOPfFe嘉泰姆

The CXAR41278 is a stereo audio power amplifier in 24pin TSSOP thermal pad package or 24pin QFN package. It can drive 2.0W continuous RMS power into 4Ω load per channel in Bridge-Tied Load (BTL) mode at 5V supply voltage. Its THD is smaller than 1% under the above operation condition. The CXAR41278 can mute the output when Mute is activated. For the low current consumption applications, the SHDN mode is supported to disable the CXAR41278 when it is idle. The current consumption can be further reduced to below 5μA. The CXAR41278 also supports two input paths, that means two different gain loops can be set in the same PCB and choosing either one by setting IN1/IN2 pin. It enhances the hardware designing flexibility. The CXAR41278 also supports an extra function -- the maximum output power clamping function to protect the speakers from burned-out.

   产品特点 返回TOPfFe嘉泰姆

„ Depop Circuitry Integrated fFe嘉泰姆

„ Output Power at 1% THD+N, VDD=5V fFe嘉泰姆

--2.0W/CH (typical) into a 4Ω Load fFe嘉泰姆

--1.3W/CH (typical) into a 8Ω Load fFe嘉泰姆

„ Output Power at 10% THD+N, VDD=5V fFe嘉泰姆

--2.6W/CH (typical) into a 4Ω Load fFe嘉泰姆

--1.6W/CH (typical) into a 8Ω LoadfFe嘉泰姆

„ Maximum Output Power Clamping Circuitry Integrated fFe嘉泰姆

„ Bridge-Tied Load (BTL) fFe嘉泰姆

„ Stereo Input MUX fFe嘉泰姆

„ Mute and Shutdown Control Available fFe嘉泰姆

„ Surface-Mount Power Package 24-Pin TSSOP-P & 24-Pin QFN AvailablefFe嘉泰姆

   应用范围 返回TOPfFe嘉泰姆

„ Stereo Power Amplifiers for Notebooks or Desktop Computers fFe嘉泰姆

„ Multimedia Monitors fFe嘉泰姆

„ Stereo Power Amplifiers for Portable Audio SystemsfFe嘉泰姆

   技术规格书（产品PDF) 返回TOP fFe嘉泰姆

     需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持</span>！</span>
fFe嘉泰姆