中文
EnglishCXLE81106 includes cycle-by-cycle 700mA current limit to maximize inductor current and over-temperature protection circuit. The over-voltage protection will be enabled when VOUT exceeds 38V. The curre
摘要：CXLE81106 includes cycle-by-cycle 700mA current limit to maximize inductor current and over-temperature protection circuit. The over-voltage protection will be enabled when VOUT exceeds 38V. The curre
目录
产品概述 返回TOP
The CXLE81106 boost converter contains a 0.46Ω internal switch. The IC operates at constant frequency 600 kHz, allowing the use of tiny, low cost and low height inductors and capacitors. The IC operates from a 2.7V to 7V supply voltage. High inrush current at start-up is eliminated using large compensation capacitor. Constant frequency current mode PWM architecture results in low, predictable output noise. The CXLE81106 includes cycle-by-cycle 700mA current limit to maximize inductor current and over-temperature protection circuit. The over-voltage protection will be enabled when VOUT exceeds 38V. The current of LED is set by a resistor connected between FB and GND. The CXLE81106 is available in TDFN2X2-6 package.
产品特点 返回TOP
„ 2.7V to 7V Input Voltage Range
„ 600kHz Operating Frequency
„ 38V High Output Voltage
„ Over-Voltage Protection
„ 5kHz to 100kHz PWM Brightness Control
„ Built-in Cycle-by-Cycle Current Limit
„ 0.2V Low Reference Voltage
„ TDFN2X2-6 Package
应用范围 返回TOP
„ Cellular Phone
„ LED Module
„ Compact Back Light Module
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
相关芯片选择指南 返回TOP 更多同类产品......
|
LED Backlight Driver |
|||||||||
|
Part NO. |
Vin(V) min. |
Vin(V) max. |
CH |
VOUT (max) |
ISW (A) |
FSW (kHz) |
VLED FB(V) |
Note |
Package |
|
2.5 |
5.5 |
1 |
20 |
1.2 |
1000 |
0.1/0.2 / 0.3 |
LX,GND,FB,EN,OVP,VIN,EN Dimming 100~200kHz,6SxP |
TSOT23-6 |
|
|
2.5 |
5.5 |
1 |
40 |
1.2 |
1000 |
0.2 |
LX,GND,FB,EN,OVP,VIN,EN Dimming 100~200kHz |
TSOT23-6 |
|
|
4.2 |
24 |
6 |
40 |
||||||
文章标签
暂无标签
发表评论