The APW8820 offers a compact power supply solution to provide 2 voltages required by notebook application. The 2 PWM controllers use current-mode scheme with phase shift 180 degrees control scheme
Features
Built in 2 PWM Controller into single chip
High Input Battery Voltage Range from 5.5V to 28V
Fixed 1.0MHz Switching Frequency for Individual
Channel
Built in Programmable Inductor DCR Sense For
Inductor Current Sense Function
Built in Current Mode Control with fully Support
MLCC Output Capacitor
Built in 180 degrees Phase Shift Function
Built in PWM/PSM/Ultra Sonic PFM (25kHz) Control
Schemes
Built in Internal 5V/175mA and 3.3V/50mA Linear
Regulators
0.5V Reference Voltage
Built in Digital Soft-start
Latch Off Mode for Both Channels
Over-Temperature Protection
Built in SYSPOK Report function for 2 PWM
Channels
Available in TQFN4x4-24 and QFN3x3-20 Package
Halogen and Lead Free Available (RoHS Compliant)
General Description
The APW8820 offers a compact power supply solution to
provide 2 voltages required by notebook application. The
2 PWM controllers use current-mode scheme with phase
shift 180 degrees control scheme allow to use MLCC
output capacitors. The higher fixed 1MHz switching fre-
quency allows to use thin and small filtered components.
The APW8820 provides good transient response and
accurate DC output voltage in either PSM or PWM Mode.
In Pulse Skipping Modulation Mode (PSM), the APW8820
provides high efficiency over light to heavy loads with load-
ing modulated switching frequencies. The unique ultra-
sonic mode maintains the switching frequency above
25kHz, which eliminates noise in audio applications. The
APW8820 built in individual enable control input on 2 chan-
nels for flexible power sequence adjustment. The power-
good outputs (SYSPOK) indicate the operating mode of
the PWMx.
The APW8820 has been equipped with excellent protec-
tion functions: Power-on-RESET (POR), over-current pro-
tection (OCP), over-voltage protection OVP, under-volt-
age protection (UVP) and over-temperature protection
(OTP) to prevent the device operate under abnormal con-
dition or adjacent pin shortage.


中文
English

发表评论