中文
EnglishCXHA3120 is a Hall sensor with latched digital output. It’s suitable for electronic commutation of brushless DC motor applications. The CXHA3120 uses a chopper amplifier for magnetic
目录
1.产品概述 2.产品特点 3.应用范围 4.技术规格书下载（PDF文档）</span>
5.产品封装 6.电路原理图</strong> 7.相关产品
CXHA3120 is a Hall
sensor with latched digital output. It’s suitable for electronic
commutation of brushless DC motor applications. The CXHA3120 uses a
chopper amplifier for magnetic signal amplification, which can achieve a
low offset and thus precise magnetic switching thresholds.
If a magnetic flux density larger than threshold Bop,NO is
turned on(low). The output state is held until a magnetic flux density
reversal falls below Brp causing NO to be turned off (high)
˙Maximum output sink current 50mA
˙Open-drain pre-driver
˙Power reverse polarity protection
˙Available in SIP-3L, SOT23(JTFS72XY) package
Motor Driver
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持</span>！</span>
| HALL EFFECT SENSOR E-BIKE App.电动车应用霍尔效应传感器 | |||||||
| Part No. | VIN | IOUT | Operating | Package | Status | Notes | |
| (Min) | (Max) | Temperature(℃) | |||||
| (V) | (V) | (mA) | |||||
| CXHA3118 | 3 | 28 | 50 | -40 to 125 | SIP-3L | MP | Hall Switch for E-Bike App. |
| CXHA3119 | 3 | 28 | 50 | -40 to 125 | SIP-3L | MP | Hall Switch for E-Bike App. |
| CXHA3120 | 2.4 | 16 | 50 | -20 to 105 | SIP-3L、SOT23 | MP | E-Bike App. |
| CXHA3121 | 3 | 28 | 50 | -40 to 125 | SIP-3L | MP | E-bike Motor Hall Sensor |
| CXHA3122 | 2.7 | 7 | -20 to 85 | SIP-3L | MP | Linear Hall Sensor 1.3mV/G / E-Bike App. | |
| CXHA3123 | 2.4 | 16 | 50 | -40 to 125 | SIP-3L 、SOT23 | MP | Hall Switch for E-Bike App. |
| CXHA3124 | 2.4 | 16 | 50 | -40 to 125 | SIP-3L SOT23 | MP | Hall Switch for E-Bike App. |
发表评论