CXHA3123是一个带有锁存数字输出的霍尔传感器。适用于无刷直流电动机的电子换相应用。CXHA3123使用斩波放大器进行磁信号放大，可以实现低偏移，从而精确的磁开关阈值。
NO-pin的输出是低活性还是高活性取决于大于BOP或BRP阈值的外部磁源的磁通密度
˙排水明沟预驱动
˙50mA最大汇输出电流
精确的磁开关阈值
-
[ CXHA3123 ]"
目录
1.产品概述 2.产品特点 3.应用范围 4.技术规格书下载（PDF文档）
一.产品概述
CXHA3123 is a Hall sensor with latched digital output. It’s suitable for electronic commutation of brushless DC motor applications. The CXHA3123 uses a chopper amplifier for magnetic signal amplification, which can achieve a low offset and thus precise magnetic switching threshold.
The output of NO pin is active low or high depends on flux density of the external magnetic source which is larger than threshold of BOP or BRP
二.产品特点
˙Open-drain pre-driver
˙50mA maximum sink output current
˙Precise magnetic switching thresholds
˙Available in SOT-23 and SIP-3L packages
三.应用范围
Motor Driver
四.技术规格书（产品PDF)
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
五.产品封装图
六.电路原理图
七.相关芯片选择指南
| HALL EFFECT SENSOR E-BIKE App.电动车应用霍尔效应传感器 | |||||||
| Part No. | VIN | IOUT | Operating | Package | Status | Notes | |
| (Min) | (Max) | Temperature(℃) | |||||
| (V) | (V) | (mA) | |||||
| CXHA3118 | 3 | 28 | 50 | -40 to 125 | SIP-3L | MP | Hall Switch for E-Bike App. |
| CXHA3119 | 3 | 28 | 50 | -40 to 125 | SIP-3L | MP | Hall Switch for E-Bike App. |
| CXHA3120 | 2.4 | 16 | 50 | -20 to 105 | SIP-3L、SOT23 | MP | E-Bike App. |
| CXHA3121 | 3 | 28 | 50 | -40 to 125 | SIP-3L | MP | E-bike Motor Hall Sensor |
| CXHA3122 | 2.7 | 7 | -20 to 85 | SIP-3L | MP | Linear Hall Sensor 1.3mV/G / E-Bike App. | |
| CXHA3123 | 2.4 | 16 | 50 | -40 to 125 | SIP-3L 、SOT23 | MP | Hall Switch for E-Bike App. |
| CXHA3124 | 2.4 | 16 | 50 | -40 to 125 | SIP-3L SOT23 | MP | Hall Switch for E-Bike App. |
