CXHA3126是一个互补的双前置驱动器输出与嵌入式霍尔效应传感器集成电路。它集成了用于NPN或NMOS驱动器的输出钳位图腾磁极驱动器、高灵敏度霍尔效应传感器、SIP-4L封装的转子锁定事件计时器，使该解决方案尽可能简单地在直流电机或风扇的高功率条件下运行。为了安全起见，锁定关闭功能将关闭IC的内部驱动器，避免转子锁定时过热，IC将在这些驱动器关闭后尝试重新启动转子扭矩热关机保护（TSD）确保IC内部驱动器在安全工作温度范围内工作。上述所有保护机制结合起来，在电机系统中提供完整的保护方案，避免任何可能的损坏，并保证在正确和安全的操作下。
˙高灵敏度霍尔效应传感器
˙低功耗
输出夹紧图腾磁极驱动器
˙锁定关机保护和自动重启功能
边缘检测器和传播延迟定时器
˙热关机保护（TSD）
˙提供SIP-4L包装
12V至48V直流电机/风扇系统
-
[ CXHA3126 ]
目录
1.产品概述 2.产品特点 3.应用范围 4.技术规格书下载（PDF文档）
一.产品概述
CXHA3126 is a complementary dual pre-drivers output with embedded Hall-effect sensor IC. It integrates a output clamping totem-pole drivers for NPN or NMOS drivers, a high sensitivity hall-effect sensor, an event timer for rotor locked in SIP-4L package, which make this solution operation under a high power conditions of DC motors or FANs as simply as possible.
For safety, Lock-shutdown function would turn the IC’s internal drivers off avoiding over-heat when the rotor is locked, and IC will try to re-start the rotor’s torque after the time of these drivers’ shutdown.
Thermal-shutdown protection (TSD) ensures the internal drivers of IC are operating under a safe operating temperature range.
All the protection mechanisms mentioned above combine to provide a complete protecting scenario in the motor system and avoid any possible damages and guarantee under a correct and safe operation.
二.产品特点
˙High sensitivity Hall-effect sensor
˙Low power consumption
˙Output clamping totem-pole drivers
˙Lock-shutdown protection & auto-restart function
˙Edge detector and propagation delay timer
˙Thermal shutdown protection(TSD)
˙Available in SIP-4L package
˙For 12V to 48V DC motor / FAN systems
三.应用范围
Motor drive
四.技术规格书（产品PDF)
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
五.产品封装图
六.电路原理图
七.相关芯片选择指南
| HALL EFFECT SENSOR E-BIKE App.电动车应用霍尔效应传感器 | |||||||
| Part No. | VIN | IOUT | Operating | Package | Status | Notes | |
| (Min) | (Max) | Temperature(℃) | |||||
| (V) | (V) | (mA) | |||||
| CXHA3118 | 3 | 28 | 50 | -40 to 125 | SIP-3L | MP | Hall Switch for E-Bike App. |
| CXHA3119 | 3 | 28 | 50 | -40 to 125 | SIP-3L | MP | Hall Switch for E-Bike App. |
| CXHA3120 | 2.4 | 16 | 50 | -20 to 105 | SIP-3L、SOT23 | MP | E-Bike App. |
| CXHA3121 | 3 | 28 | 50 | -40 to 125 | SIP-3L | MP | E-bike Motor Hall Sensor |
| CXHA3122 | 2.7 | 7 | -20 to 85 | SIP-3L | MP | Linear Hall Sensor 1.3mV/G / E-Bike App. | |
| CXHA3123 | 2.4 | 16 | 50 | -40 to 125 | SIP-3L 、SOT23 | MP | Hall Switch for E-Bike App. |
| CXHA3124 | 2.4 | 16 | 50 | -40 to 125 | SIP-3L SOT23 | MP | Hall Switch for E-Bike App. |
| HALL EFFECT SENSOR >> Others App. | ||||||||
| Part No. | VIN | IOUT | Coil Type | Operating | Notes | Package | Status | |
| (Min) | (Max) | Temperature | ||||||
| (V) | (mA) | (℃) | ||||||
| CXHA3125 | 3 | 20 | 25 | -20 to 100 | Hall Sensor IC | SIP-3L | MP | |
| CXHA3125N | 3 | 28 | 50 | -40 to 150 | Hall Sensor IC | SIP-3L | MP | |
| CXHA3126 | 12 | 48 | 20 | Half Wave | -40 to 105 | Complementary Dual Pre-Driver | SIP-4L | MP |
◀ 上一篇:CXHA3125N霍尔效应传感器无刷直流电动机的电子换相而设计磁感应的片内霍尔电压发生器放大霍尔电压的比较器提供开关磁滞以抑制噪声的施密特触发器以及开路集电极输出工作电压3.0V至28V
下一篇▶:CXHA3127全向霍尔效应传感器集成电路采用混合信号CMOS工艺先进的斩波稳定技术精确稳定的磁开关点霍尔元件和模拟信号处理电路提供内部控制的时钟机制
| 热门信息 |
|---|
| 最新信息 |
|---|
| 推荐信息 |
|---|
