产品信息查询
产品 技术 新闻 资料
首页 > 产品中心 > 电源管理 > DC升压型转换器 > DC升压转换 >1MHz开关频率CXSU63035紧凑高效同步升压转换器与功率mosfet集成用于单电池锂离子/聚合物电池内部软启动
1MHz开关频率CXSU63035紧凑高效同步升压转换器与功率mosfet集成用于单电池锂离子/聚合物电池内部软启动
12

CXSU63035是一款紧凑、高效、同步升压转换器,集成了用于单电池锂离子/聚合物电池的功率mosfet。这个转换器无开关时仅消耗100uA静态电流。当电流负载较轻时,该变换器进入突发模式以获得高效率。当电流负载为足够重,它进入固定频率的脉宽调制模式

1MHz开关频率CXSU63035紧凑高效同步升压转换器与功率mosfet集成用于单电池锂离子/聚合物电池内部软启动
产品手册
样品申请

样品申请

产品简介

目录i9x嘉泰姆

1.产品概述                       2.产品特点i9x嘉泰姆
3.应用范围                       4.下载产品资料PDF文档 i9x嘉泰姆
5.产品封装图                     6.电路原理图                   i9x嘉泰姆
7.功能概述                        8.相关产品i9x嘉泰姆

 i9x嘉泰姆

一,产品概述(General Description)         i9x嘉泰姆
         The CXSU63035 is a compact, high-efficiency, synchronous step-up converter with power MOSFETintegrated for a single-cell Li-ion/polymer battery. This converteri9x嘉泰姆
consumes only 100uA quiescent current when no switching. When current load is light, this converter enters burst mode to obtain high efficiency. When current load isi9x嘉泰姆
heavy enough, it enters fixed-frequency PWM mode. It adopts peak current mode for fast transient response with internal compensation. This converter contains  cycle-by-cycle current limiting and short protection circuit. It is suitable for iPad-like computers, smart phones and portable handheld devices. The device is packed in ESOP8 package.i9x嘉泰姆
二.产品特点(Features)i9x嘉泰姆
·Wide input range: 2.6-5V input, 2.0A @5V Vouti9x嘉泰姆
· 1MHz switching frequencyi9x嘉泰姆
· Low RDS(ON): 110mΩ@5V NMOS and 150mΩ@5V PMOSi9x嘉泰姆
· Up to 93% efficiencyi9x嘉泰姆
· Accurate Reference: 0.6V Referencei9x嘉泰姆
· Under-Voltage lockout Protectioni9x嘉泰姆
  Over-Temperature Protection Short Protectioni9x嘉泰姆
· Internal Soft Starti9x嘉泰姆
· 1uA Shutdown currenti9x嘉泰姆
· RoHS Compliant and Halogen Freei9x嘉泰姆
· Compact package: ESOP8i9x嘉泰姆
三,应用范围 (Applications)i9x嘉泰姆
IPad- like tablet computersi9x嘉泰姆
Smart phonesi9x嘉泰姆
Other portable devicesi9x嘉泰姆
四.下载产品资料PDF文档 i9x嘉泰姆


需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持i9x嘉泰姆

 QQ截图20160419174301.jpgi9x嘉泰姆

五,产品封装图 (Package)i9x嘉泰姆
i9x嘉泰姆

引脚i9x嘉泰姆

名字i9x嘉泰姆

功能i9x嘉泰姆

1i9x嘉泰姆

ROi9x嘉泰姆

接收输出端: A 端电压比 B 端高 0V 时 RO 为高,A 端电压比 B 端低 300mVi9x嘉泰姆
时 RO 为低i9x嘉泰姆

2i9x嘉泰姆

REi9x嘉泰姆

接收使能端:低电平有效,RE 为高时,接收输出为高阻i9x嘉泰姆

3i9x嘉泰姆

DEi9x嘉泰姆

发送使能端:高电平有效,DE 为低时,发送输出为高阻。 DE 为高电平时i9x嘉泰姆
芯片工作在发送状态,DE 为低电平且 RE 为低电平时芯片工作在接收状态。i9x嘉泰姆

4i9x嘉泰姆

DIi9x嘉泰姆

发送数据输入端: DI 为低时,A 输出高电平 B 输出低电平,DI 为高时正好i9x嘉泰姆
相反。i9x嘉泰姆

5i9x嘉泰姆

GNDi9x嘉泰姆

地,电源负端i9x嘉泰姆

6i9x嘉泰姆

Ai9x嘉泰姆

正向接收输入端也即正向发送输出端i9x嘉泰姆

7i9x嘉泰姆

Bi9x嘉泰姆

反向接收输入端也即反向发送输出端i9x嘉泰姆

8i9x嘉泰姆

VCCi9x嘉泰姆

电源正端i9x嘉泰姆

六.电路原理图i9x嘉泰姆
i9x嘉泰姆
i9x嘉泰姆
七,功能概述i9x嘉泰姆


UnderVoltage Lockouti9x嘉泰姆

An under voltage lockout function prevents device start-up if the supply voltage on VBAT is lower thani9x嘉泰姆
approximately 2.8V. When in operation and the battery is being discharged, the device automatically enters thei9x嘉泰姆
shutdown mode if the voltage on VBAT drops below approximately 2.5V. This under voltage lockout function isi9x嘉泰姆
implemented in order to prevent the malfunctioning of the converter. i9x嘉泰姆
SoftStarti9x嘉泰姆
When the device enables the internal start-up cycle, it starts with the first step, the precharge phase. Duringi9x嘉泰姆
precharge, the rectifying switch is turned on until the output capacitor is charged to a value close to the inputi9x嘉泰姆
voltage. The rectifying switch current is limited in that phase. This also limits the output current underi9x嘉泰姆
short-circuit conditions at the output. After charging the output capacitor to the input voltage the device startsi9x嘉泰姆
switching.i9x嘉泰姆

Application Informationi9x嘉泰姆

Because of the high integration in the CXSU63035, the application circuit based on this regulator IC is ratheri9x嘉泰姆
simple. Only input capacitor CIN, output capacitor COUT, inductor L and feedback resistors (R1 and R2) need toi9x嘉泰姆
be selected for the targeted applications specifications.i9x嘉泰姆
Feedback resistor dividers R1 and R2:i9x嘉泰姆
Choose R1 and R2 to program the proper output voltage. To minimize the power consumption under light loads,i9x嘉泰姆
it is desirable to choose large resistance values for both R1 and R 2. A value of between 10k and 1M isi9x嘉泰姆
recommended for both resistors. If R1=200k is chosen, then R2 can be calculated to be:i9x嘉泰姆
R2 = (R1×0.6V)/(VOUT - 0.6V)i9x嘉泰姆
Input capacitor CIN:i9x嘉泰姆
To minimize the potential noise problem, place a typical X5R or better grade ceramic capacitor really close toi9x嘉泰姆
the IN and GND pins. Care should be taken to minimize the loop area formed by CIN, and IN/GND pins. In thisi9x嘉泰姆
case a 10uF low ESR ceramic is recommended.i9x嘉泰姆
Output capacitor COUT:i9x嘉泰姆
The output capacitor is selected to handle the output ripple noise requirements. Both steady state ripple andi9x嘉泰姆
transient requirements must be taken into consideration when selecting this capacitor. For the best performance,i9x嘉泰姆
it is recommended to use X5R or better grade ceramic capacitor with 10V rating and more than two pcs 22uFi9x嘉泰姆
Capacitor.i9x嘉泰姆
八,相关产品                更多同类产品........    i9x嘉泰姆


内置MOS同步DC-DC升压ICi9x嘉泰姆

型号i9x嘉泰姆

工作模式i9x嘉泰姆

电压范围i9x嘉泰姆

输出电压i9x嘉泰姆

输出电压形式i9x嘉泰姆

输出电压精度i9x嘉泰姆

输出电流限制i9x嘉泰姆

效率i9x嘉泰姆

静态电流i9x嘉泰姆

工作频率i9x嘉泰姆

封装i9x嘉泰姆

CXSU63033i9x嘉泰姆

PWMi9x嘉泰姆

0.9V-5.0Vi9x嘉泰姆

最大5.5Vi9x嘉泰姆

可调输出i9x嘉泰姆

+/-2%i9x嘉泰姆

950mAi9x嘉泰姆

90%i9x嘉泰姆

0.1uAi9x嘉泰姆

1.4MHzi9x嘉泰姆

SOT-26i9x嘉泰姆

CXSU63033Ai9x嘉泰姆

PWMi9x嘉泰姆

0.85V-5.0Vi9x嘉泰姆

最大5.0Vi9x嘉泰姆

可调输出i9x嘉泰姆

+/-2%i9x嘉泰姆

2Ai9x嘉泰姆

93%i9x嘉泰姆

0.1uAi9x嘉泰姆

1.5MHzi9x嘉泰姆

SOT23-6i9x嘉泰姆

CXSU63034i9x嘉泰姆

PWMi9x嘉泰姆

0.85V-5.5Vi9x嘉泰姆

2.5V-5.5Vi9x嘉泰姆

可调输出/真关断i9x嘉泰姆

+/-2%i9x嘉泰姆

1.2Ai9x嘉泰姆

94%i9x嘉泰姆

300uAi9x嘉泰姆

1.2MHzi9x嘉泰姆

SOT23-6i9x嘉泰姆

CXSU63035i9x嘉泰姆

PWMi9x嘉泰姆

2.5V-4.5Vi9x嘉泰姆

最大6Vi9x嘉泰姆

可调输出i9x嘉泰姆

+/-2%i9x嘉泰姆

3.3Ai9x嘉泰姆

93%i9x嘉泰姆

100uAi9x嘉泰姆

1MHzi9x嘉泰姆

ESOP-8i9x嘉泰姆

CXSU63036i9x嘉泰姆

PWMi9x嘉泰姆

2.4V-6.0Vi9x嘉泰姆

2.5V-5.3Vi9x嘉泰姆

可调输出/真关断i9x嘉泰姆

+/-2%i9x嘉泰姆

6Ai9x嘉泰姆

91%i9x嘉泰姆

180uAi9x嘉泰姆

500KHzi9x嘉泰姆

ESOP-8i9x嘉泰姆

CXSU63037i9x嘉泰姆

PWMi9x嘉泰姆

2.5V-5.25Vi9x嘉泰姆

2.5V-5.5Vi9x嘉泰姆

可调输出i9x嘉泰姆

+/-2%i9x嘉泰姆

8Ai9x嘉泰姆

90%i9x嘉泰姆

45uAi9x嘉泰姆

500KHzi9x嘉泰姆

ESOP-8i9x嘉泰姆

CXSU63038Bi9x嘉泰姆

PWMi9x嘉泰姆

2.8V-5.0Vi9x嘉泰姆

最大5.5Vi9x嘉泰姆

可调输出i9x嘉泰姆

+/-2%i9x嘉泰姆

4Ai9x嘉泰姆

91%i9x嘉泰姆

180uAi9x嘉泰姆

550KHzi9x嘉泰姆

ESOP-8i9x嘉泰姆

CXSU63038Ai9x嘉泰姆

PWMi9x嘉泰姆

2.5V-6.0Vi9x嘉泰姆

最大5.5Vi9x嘉泰姆

可调输出/真关断i9x嘉泰姆

+/-2%i9x嘉泰姆

6Ai9x嘉泰姆

90%i9x嘉泰姆

0.5uAi9x嘉泰姆

1.2MHzi9x嘉泰姆

SOP8-PPi9x嘉泰姆

CXSU63039i9x嘉泰姆

PWMi9x嘉泰姆

2.5V-5.5Vi9x嘉泰姆

最大5.5Vi9x嘉泰姆

可调输出/真关断i9x嘉泰姆

+/-2%i9x嘉泰姆

6Ai9x嘉泰姆

90%i9x嘉泰姆

0.5uAi9x嘉泰姆

1.2MHzi9x嘉泰姆

QFN4X4-16Li9x嘉泰姆

CXSU63040i9x嘉泰姆

PWMi9x嘉泰姆

1.8V-6.0Vi9x嘉泰姆

最大5.5Vi9x嘉泰姆

可调输出/真关断i9x嘉泰姆

+/-2%i9x嘉泰姆

6Ai9x嘉泰姆

90%i9x嘉泰姆

0.5uAi9x嘉泰姆

1.2MHzi9x嘉泰姆

SOP8-PPi9x嘉泰姆

CXSU63041Bi9x嘉泰姆

PWMi9x嘉泰姆

1.8V-5.25Vi9x嘉泰姆

2.5V-5.5Vi9x嘉泰姆

可调输出i9x嘉泰姆

+/-2%i9x嘉泰姆

5Ai9x嘉泰姆

97%i9x嘉泰姆

10uAi9x嘉泰姆

500KHzi9x嘉泰姆

QFN2X2-10i9x嘉泰姆

i9x嘉泰姆

发表评论
    共有条评论
    用户名: 密码:
    验证码: 匿名发表

热门信息
  • 最新信息
    推荐信息
    相关文章
  • 外部输入参考电压升压型DC/DC控制器CXSU63151轻负载到
  • CXLE8692基准源振荡电路误差放大器相位补偿电路PWM/PF
  • CXLE8692基准源振荡电路误差放大器相位补偿电路PWM/PF
  • CXLE86201固定频率恒定电流升压DC/DC控制器用于手机PD
  • CXLE86201固定频率恒定电流升压DC/DC控制器用于手机PD
  • CXLE86201固定频率恒定电流升压DC/DC控制器用于手机PD
  • CXLE86200固定频率恒定电流的升压DC/DC控制器用于高清
  • CXLE86200固定频率恒定电流的升压DC/DC控制器用于高清
  • CXLE86200固定频率恒定电流的升压DC/DC控制器用于高清
  • CXLE8684 CXLE8685固定频率恒定电流升压DC/DC控制器用
  • 推荐资讯
    智能电表驱动技术全景解析:从计量芯片到通信模块的完整指南
    智能电表驱动技术全景
    电子秤显示模块核心技术解析:从LCD驱动到智能接口的全方案指南
    电子秤显示模块核心技
    显示驱动电路深度解析:从基础原理到先进设计的完整指南  SEO关键词:
    显示驱动电路深度解析
    智能家电控制系统全面解析:从技术原理到未来趋势的深度指南
    智能家电控制系统全面
    串行通信接口终极指南:从基础原理到高速协议的全景解析
    串行通信接口终极指南
    家电显示控制系统全景解读:从UI设计到智能交互的技术演进
    家电显示控制系统全景
    辉度调节技术全面解析:从PWM调光到智能亮度控制的全景指南
    辉度调节技术全面解析
    串行接口终极指南:从UART到PCIe,详解串行通信原理与应用
    串行接口终极指南:从UA
    显示控制系统深度解析:从驱动原理到多屏交互的全景指南
    显示控制系统深度解析
    段码LED显示技术详解:原理、应用与选型指南
    段码LED显示技术详解:
    键盘扫描揭秘:从原理到应用,全面解析键盘如何识键如神
    键盘扫描揭秘:从原理到
    恒流驱动:终极指南 - 原理、优势与应用场景
    恒流驱动:终极指南 -