CXLD64007系列是高精度、低噪声、LDO调压器。输出电压可通过外部电阻设置。片上微调将参考/输出电压调整到±2%的精度范围内。内部保护功能包括输出电流限制、安全工作区补偿和热关机。限流器的反馈电路还可作为输出限流器和输出引脚的短路保护。CE功能可以关闭调节器的输出，从而大大降低功耗。CXLD64007系列可在高达18V的输入下工作
-
"
目录
7.相关产品
产品概述 返回TOP
The CXLD64007 series are highly accurate, low noise, LDO Voltage Regulators .The output voltage can be set via the external resistor. On chip trimming adjusts the reference/output voltage to within ±2% accuracy. Internal protection features consist of output current limiting, safe operating area compensation, and thermal shutdown. The current limiter’s feedback circuit also operates as a short protect for the output current limiter and the output pin. The CE function allows the output of regulator to be turned off, resulting in greatly reduced power consumption. The CXLD64007 series can operate with up to 18V input.
产品特点 返回TOP
Maximum Output Current: 400mA
Voltage Setting via External Resistor:1.25V~8V
Dropout Voltage:125mV@ IOUT =100mA (Vout=3.3V)
Operating Voltage Range: 2.8V～18V
Highly Accuracy: ±2％
Standby Current: 45uA（TYP.）
Line Regulation: 30mV（TYP.）
Temperature Stability≤0.5%
Thermal Shutdown Protection：165℃
Packages:SOT23-5
应用范围 返回TOP
Consumer and Industrial Equipment Point of Regulation
Switching Power Supply Post Regulation
Hard Drive Controllers Battery Chargers
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品......
|
可调输出LDO IC |
||||||||
|
型号 |
最大输 出电流 |
输入电压 |
输出电压 |
精度 |
功耗 |
负载稳 定率 |
线性稳定率 |
封装形式 |
|
300mA |
6.0V |
可调，最低0.8V |
±2% |
静态电流：30uA 关断电流：0.1uA |
50mV |
0.10% |
SOT-25 |
|
|
500mA |
6.0V |
可调，最低0.8V |
±1.5% |
静态电流：40uA |
0.60% |
0.08% |
SOT-25 |
|
|
400mA |
2.8V-18V |
可调，最低1.25V |
±2% |
静态电流：45uA |
30mV |
0.05% |
SOT-25 |
|
|
双路带使能LDO IC |
||||||||
|
型号 |
最大输 出电流 |
输入电压 |
输出电压 |
精度 |
功耗 |
负载稳 定率 |
线性稳定率 |
封装形式 |
|
300mA |
10V |
1.8+2.8/1.8+3.3 /2.8+3.3/2.8+1.8V |
2% |
静态电流：25uA 关断电流：0.11uA |
50mV |
0.01% |
SOT-26 |
|
|
300mA |
10V |
2.8+1.8/3.3+1.8 /1.8+2.8V |
2% |
静态电流：25uA 关断电流：0.11uA |
50mV |
0.01% |
SOT-26 |
|
