• [ 产品资料下载 ]

样品申请

目录

• 1.产品概述       2.产品特点     jil嘉泰姆

• 3.应用范围       4.技术规格书下载（PDF文档）jil嘉泰姆

• 5.产品封装       6.电路原理图  jil嘉泰姆

• 7.相关产品jil嘉泰姆

   产品概述 返回TOPjil嘉泰姆

      The CXSU63041 devices provide a power supply solution for products powered by either a one-cell Li-Ion or Li-polymer, or a two to three-cell alkaline, NiCd or NiMH battery. The converter generates a stable output voltage that is either adjusted by an external resistor divider. It provides high efficient power conversion and is capable of delivering output currents up to 1.5A at 5V at a supply voltage down to 2V. The implemented boost converter is based on a fixed switching frequency (500kHz typical), current-mode controller using a synchronous rectifier to obtain maximum efficiency. Boost switch and rectifier switch are connected internally to provide the lowest leakage inductance and best EMI behavior possible. The current-mode control scheme provides fast transient response and good output voltage accuracy. At light load, the converter will automatically enter into Pulse Frequency Modulation (PFM) operation to reduce the dominant switching losses. During PFM operation, the IC consumes very low quiescent current and maintains high efficiency over a wide load current range. The converter can be disabled to minimize battery drain. During shutdown, the load is completely disconnected from the battery. The device allows use of small inductors and output capacitors for USB devices.

   产品特点 返回TOPjil嘉泰姆

 97% Efficiency at VOUT=5V from 3.3V Input jil嘉泰姆

 Device Quiescent Current: 37μA (Typ) jil嘉泰姆

 Guaranteed 2.5A Output Current at VOUT=5V from 3.3V Input jil嘉泰姆

 500kHz PWM Switching Frequency jil嘉泰姆

 Synchronous and Embedded Power MOSFETs, No Schottky Diode Required jil嘉泰姆

 Low RDS(ON) (main switch/synchronous switch) at 5.0V output:   20/40mohm jil嘉泰姆

 Input Voltage Range: 1.8V to 5.25V jil嘉泰姆

 Adjustable Output Voltage Range: from 2.5V to 5.5V jil嘉泰姆

 Pulse Frequency Modulation Operation for Improved Efficiency at Low Output Power jil嘉泰姆

 Current Mode Operation with Internal Compensation for Excellent Line    and Load Transient Response jil嘉泰姆

 Logic Controlled Shutdown(<1μA) jil嘉泰姆

 Load Disconnect During Shutdown jil嘉泰姆

 Automatic output discharge at shutdown: jil嘉泰姆

    CXSU63041A: Auto output discharge function jil嘉泰姆

   CXSU63041B: No output discharge function jil嘉泰姆

 Low Battery Comparator jil嘉泰姆

 Internal Soft-Start to Limit Inrush Current jil嘉泰姆

 Over Current Protection jil嘉泰姆

 Input Under Voltage Lockout jil嘉泰姆

 Output Over Voltage Protection jil嘉泰姆

 Over-Temperature Protection jil嘉泰姆

 Available in 2.1mm x 2.1mm QFN10 Packagejil嘉泰姆

   应用范围 返回TOPjil嘉泰姆

 All Single Cell Li or Dual Cell Battery Operated Products as Tablet PC, Smartbook and Other Portable Equipment jil嘉泰姆

 Products including portable HDMI and USB-OTG jil嘉泰姆

 USB Hosts Without Native 5V Supplies jil嘉泰姆

 USB Charging Port (5V) jil嘉泰姆

 Power Bank, Battery Backup Units jil嘉泰姆

 Wireless Peripherals jil嘉泰姆

 Portable Audio Players jil嘉泰姆

 Personal Medical Devices jil嘉泰姆

 Industrial Metering Equipments jil嘉泰姆

 DC/DC Micro Modulesjil嘉泰姆

   技术规格书（产品PDF) 返回TOP jil嘉泰姆

     需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！jil嘉泰姆

 jil嘉泰姆

产品封装图 返回TOPjil嘉泰姆

jil嘉泰姆

电路原理图 返回TOPjil嘉泰姆

jil嘉泰姆

相关芯片选择指南 返回TOP             更多同类产品........    

 jil嘉泰姆

◀ 上一篇:固定1.2兆赫振荡器频率电流模式升压调节器CXSU63040自动进入脉冲频率调制PFM低ESR输出电容稳定

返回顶部

下一篇▶:恒定频率PWM电流模控制驱动N型功率管的高效同步升压芯片CXSU63042同步整流提高效率减小功耗PWM峰值电流模控制

共有条评论 用户名: 密码: 验证码: 匿名发表