CXUS7701H/L SmartSwitch is a current limited P-channel MOSFET power switch designed for high-side load switching applications. This switch operates with inputs ranging from 2.4V to 5.5V, making it id

目录Mhn嘉泰姆

1.产品概述                       2.产品特点
3.应用范围                       4.产品封装图</span>
5.电路原理图</span>                    6.产品PDF文档 
7.功能概述                        8.相关产品Mhn嘉泰姆

一,产品概述(General Description)     Mhn嘉泰姆

     The CXUS7701H/L SmartSwitch is a current limited P-channel MOSFET power Mhn嘉泰姆

switch designed for high-side load switching applications. This switch operates Mhn嘉泰姆

with inputs ranging from 2.4V to 5.5V, making it ideal for both 3V and 5V systems. An integrated current-limiting circuit protects the input supply against large currents Mhn嘉泰姆

which may cause the supply to fall out of regulation. The CXUS7701H/L is also Mhn嘉泰姆

protected from thermal overload which limits power dissipation and junction Mhn嘉泰姆

temperatures. It can be used to control loads that require up to 1A. Current limit Mhn嘉泰姆

threshold is programmed with a resistor from SET to ground. The quiescent supplyMhn嘉泰姆

 current is typically a low 9μA. In shutdown mode, the supply current decreasesMhn嘉泰姆

 to less than 1μA.Mhn嘉泰姆

      The CXUS7701H/L is available in a Pb-free 5-pin SOT23 or 8-pin SC70JW packageMhn嘉泰姆

 and is specified over the -40°C to +85°C temperature range.
二</span>.产品特点(Features)
Mhn嘉泰姆

Input Voltage Range: 2.4V to 5.5V
Mhn嘉泰姆

Programmable Over-Current Threshold
Fast Transient Response:
— 400ns Response to Short Circuit
Low Quiescent Current
— 9μA Typical
— 1μA Max with Switch Off
145mΩ Typical RDS(ON)
Only 2.5V Needed for ON/OFF Control
Under-Voltage Lockout
Thermal Shutdown
4kV ESD Rating
5-Pin SOT23 or 8-Pin SC70JW PackageMhn嘉泰姆

Temperature Range: -40°C to +85°C
三</span>,应用范围 (Applications)Mhn嘉泰姆

 Hot Swap Supplies
Notebook Computers
Peripheral Ports
Personal Communication Devices
四</span>,产品封装图 (Package)

Mhn嘉泰姆

五</span>,电路原理图</span>

六</span>.产品PDF文档 Mhn嘉泰姆

需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持</span>！</span>
Mhn嘉泰姆

七</span>,功能概述
Mhn嘉泰姆

Operation in Current Limit
Mhn嘉泰姆

     When a heavy load is applied to the output of the CXUS7701H/L,the load current is limited to the value of ILIM determined by RSET. See Figure 2, "Overload Operation." Since Mhn嘉泰姆

the load is demanding more current than ILIM, the voltage at  the output drops. This causes the CXUS7701H/L to dissipate a larger than nor-mal quantity of power, and its die temperature to increase. When the die temperature exceeds an over-temperature limit, the CXUS7701H/L will shut down until is has cooled sufficiently, at which point it will startup again.Mhn嘉泰姆

      The CXUS7701H/L will continue to cycle on and off until the load is removed, power is removed, or until a logic  high level is applied to ON. Mhn嘉泰姆

Enable Input
    In many systems, power planes are controlled by integrated circuits which run at lower voltages than the power plane itself. The enable input ON of the CXUS7701H/L has low and high threshold voltages that accommodate this condition.The threshold voltages are compatible with 5V TTL and 2.5V to 5V CMOS. Mhn嘉泰姆

Reverse Voltage
      The CXUS7701H/L is designed to control current flowing from IN to OUT. If a voltage is applied toMhn嘉泰姆

 OUT which is  greater than the voltage on IN, large currents may flow. This could cause damage to theMhn嘉泰姆

 CXUS7701H/L.Mhn嘉泰姆

八,相关产品            更多同类产品......Mhn嘉泰姆