Input Divider (M): Selectable from divisions CXCL3471BC7内置分频, 倍频电路的PLL时钟发生器,内置分频, 倍频电路, 在整个频率范围内保持低消耗电流, 具有超小型封装的PLL时钟发生器IC。输入端分频比(M), 输出端分频比(N)的值均可以在1～256范围内通过激光微调方式自由选择。输出时钟(fQ0)的频率等于标准时钟输入频率乘以N/M

   产品概述 返回TOPnaP嘉泰姆

    CXCL3471BC7系列是内置分频, 倍频电路, 在整个频率范围内保持低消耗电流, 具有超小型封装的PLL时钟发生器IC。输入端分频比(M), 输出端分频比(N)的值均可以在1～256范围内通过激光微调方式自由选择。输出时钟(fQ0)的频率等于标准时钟输入频率乘以N/M的比值(即fQ0=fCLKin×N/M)。时钟输出的频率范围为:1MHz～100MHz。时钟输入频率的范围为:32kHz～36MHz。当CE端子输入低电平时,整个芯片停止工作,此时芯片的消耗电流会低于10uA。待机时输出为高阻抗。本产品提供部分客户定制品,有需要时请提供详细的规格要求(输入, 输出频率, 工作电压等)向本公司的各分公司咨询。即使在本产品的规定规格范围内,请注意有些临界范围的频率的设定可能是无法实现的。The CXCL3471BC7 series are high frequency, low power consumption PLL clock generator ICs with divider circuit & multiplier PLL circuit. Laser trimming gives the option of being able to select from input divider ratios (M) of 1 to 256 and output divider ratios (N) of 1 to 256. Output frequency (fQ0) is equal to reference clock oscillation (fCLKin) multiplied by N/M, within a range of 1MHz to 100MHz. Further, frequency within a range of 32kHz to 36MHz can be inputted as a reference clock. The IC stops operation when low level signal is inputted to the CE pin. For this, consumption current can be reduced and output will be one of high-impedance. Because the series is semi-custom, please ask Torex sales contacts for your requested specifications such as input/output frequency, supply voltage. However, the series has the limit of specifications; therefore, your request may not be fully satisfied with your requested frequency range.naP嘉泰姆

   产品特点 返回TOPnaP嘉泰姆

naP嘉泰姆

   应用范围 返回TOPnaP嘉泰姆

naP嘉泰姆

● Clock for controlling a Imaging dot naP嘉泰姆

● Microcomputer and HDD drives naP嘉泰姆

● Cordless phones naP嘉泰姆

● Wireless communication equipment naP嘉泰姆

● PDAs naP嘉泰姆

● Cameras, VCRs naP嘉泰姆

● Various system clocksnaP嘉泰姆

   技术规格书（产品PDF) 返回TOP naP嘉泰姆

     需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持</span>！</span>
naP嘉泰姆