固定1.2兆赫振荡器频率同步整流器CXSU63139低ESR输出电容稳定电流模式升压调节器92%效率

目录FNv嘉泰姆

1.产品概述                       2.产品特点FNv嘉泰姆
3.应用范围                       4.下载产品资料PDF文档 FNv嘉泰姆
5.产品封装图                     6.电路原理图                   FNv嘉泰姆
7.功能概述                        8.相关产品FNv嘉泰姆

一,产品概述(General Description)         FNv嘉泰姆

      The CXSU63139 is a synchronous rectifier, fixed switching frequency (1.2MHz typical), andFNv嘉泰姆
current-mode step-up regulator. The device allows use of small inductors and output capacitors for USB devices. The current-mode control scheme provides fast transient response and good output voltage accuracy.At light loads, the CXSU63139 will automatically enter in Pulse Frequency Modulation (PFM) operation to reduce the dominant switching losses. During PFM operation,the IC consumes very low quiescent current and maintains high efficiency over the complete load range.FNv嘉泰姆
      The CXSU63139 also includes current-limit and over-temperature shutdown to prevent damageFNv嘉泰姆
in the event of an output overload.FNv嘉泰姆
      The CXSU63139 is available in 4mmx4mm TQFN4x4-16 and DFN3x3-12 packages.FNv嘉泰姆
二.产品特点(Features)FNv嘉泰姆

1.)92% Effiicency Synchronous Boost Converter With 1000-mA Output Current FromFNv嘉泰姆
      1.8V InputFNv嘉泰姆
2.)Stable with Low ESR Output CapacitorsFNv嘉泰姆
3.)Fixed 1.2MHz Oscillator FrequencyFNv嘉泰姆
4.)Low EMI Converter (Integrated Anti-Ringing Function)FNv嘉泰姆
5.)Low Battery OutputFNv嘉泰姆
6.)Integrated Power Save Mode Operation to Improve Light Load EfficiencyFNv嘉泰姆
7.)Load Disconnected During ShutdownFNv嘉泰姆
8.)Output Current-Limit ProtectionFNv嘉泰姆
9.)Over Temperature ProtectionFNv嘉泰姆
10.)Under Voltage ProtectionFNv嘉泰姆
11.)Enable/Shutdown FunctionFNv嘉泰姆
12.)Available in TQFN4x4-16 and DFN3x3-12 PackagesFNv嘉泰姆
13.)Lead Free and Green Devices Available (RoHS Compliant)FNv嘉泰姆
三,应用范围 (Applications)FNv嘉泰姆

Power BankFNv嘉泰姆
TabletFNv嘉泰姆
Portable EquimentFNv嘉泰姆
四.下载产品资料PDF文档 FNv嘉泰姆

需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！FNv嘉泰姆

 FNv嘉泰姆

五,产品封装图 (Package)FNv嘉泰姆

FNv嘉泰姆

六.电路原理图FNv嘉泰姆

FNv嘉泰姆

七,功能概述FNv嘉泰姆

Main Control LoopFNv嘉泰姆

The CXSU63139 is a constant frequency, synchronous rectifier, and current-mode switching regulator. FNv嘉泰姆

In normal operation, the internal N-channel power MOSFET is turned on each cycle when the oscillatorFNv嘉泰姆

 sets an internal RS latch and turned off when an internal comparator (ICMP) resets the latch. The peakFNv嘉泰姆

 inductor current which ICMP resets the RS latch is controlled by the voltage on the COMP node, which FNv嘉泰姆

is the output of the error amplifier (EAMP). An external resistive divider connected between VOUT and FNv嘉泰姆

ground allows the EAMP to receive an output feedback voltage VFB at FB pin. When the load current FNv嘉泰姆

increases, it causes a slightly decrease in VFB relative to the 0.5V reference, which in turn causes theFNv嘉泰姆

 COMP volt- age to increase until the average inductor current matches the new load current.FNv嘉泰姆
 Start-upFNv嘉泰姆
A start-up oscillator circuit is integrated in the CXSU63139.When the device enables, the circuit pumpsFNv嘉泰姆

 the output voltage high. Once the output voltage reaches 1.6V (typ),the main DC-DC circuitry turns onFNv嘉泰姆

 and boosts the output voltage to the final regulation voltage. FNv嘉泰姆
Automatic PFM/PWM mode SwitchFNv嘉泰姆
The CXSU63139 is a fixed frequency PWM peak current modulation control step-up converter. At lightFNv嘉泰姆

 loads, theCXSU63139 will automatically enter in pulse frequency modulation operation to reduce the FNv嘉泰姆

dominant switching losses. In PFM operation, the inductor current may reach zero or reverse on eachFNv嘉泰姆

 pulse. A zero current comparator turns off the P-channel synchronous MOSFET, forcing DCM(DiscontinuousFNv嘉泰姆

 Current Mode) operation at light load.These controls get very low quiescent current, help to maintain FNv嘉泰姆

high efficiency over the complete load range. FNv嘉泰姆
Synchronous RectificationFNv嘉泰姆
The internal synchronous rectifier eliminates the need for an external Schottky diode, thus reducing costFNv嘉泰姆

 and board space. During the cycle off-time, the P-FET turns on and shunts the FET body diode. As a FNv嘉泰姆

result, the syn-chronous rectifier significantly improves efficiency with-out the addition of an externalFNv嘉泰姆

 component. Conversion efficiency can be as high as 92%.FNv嘉泰姆
Load DisconnectFNv嘉泰姆
Driving EN to ground places the CXSU63139 in shutdown mode. When in shutdown, the internal powerFNv嘉泰姆

 MOSFET turns off, all internal circuitry shuts down and the quies-cent supply current reduces to 1μAFNv嘉泰姆

 maximum.A special circuit is applied to disconnect the load from the input during shutdown the FNv嘉泰姆

converter. In conventional syn-chronous rectifier circuits, the back-gate diode of the high-side P-FET FNv嘉泰姆

is forward biased in shutdown and allows current flowing from the battery to the output. However,thisFNv嘉泰姆

 device uses a special circuit, which takes the cath-ode of the back-gate diode of the high-side P-FETFNv嘉泰姆

 and disconnects it from the source when the regulator is shutdown. The benefit of this feature for FNv嘉泰姆

the system de-sign engineer is that the battery is not depleted during shutdown of the converter.  FNv嘉泰姆

No additional componentsmust be added to the design to make sure that the bat-tery is disconnectedFNv嘉泰姆

 from the output of the converter. FNv嘉泰姆
Current-Limit ProtectionFNv嘉泰姆
The CXSU63139 monitors the inductor current, flowing through the N-FET, and  limits the current FNv嘉泰姆

peak at current-limit level to prevent loads and the CXSU63139 from dam-ages during overloadFNv嘉泰姆

 conditions.FNv嘉泰姆
Over-Temperature Protection (OTP)FNv嘉泰姆
The over-temperature circuit limits the junction tempera-ture of the CXSU63139. When the junctionFNv嘉泰姆

 temperature ex-ceeds 150oC, a thermal sensor turns off the both N-FETand P-FET, allowing the FNv嘉泰姆

devices to cool. The thermal sensor allows the converters to start a soft-start process and regulateFNv嘉泰姆

 the output voltage again after the junction temperature cools by 30oC. The OTP is designed with FNv嘉泰姆

a 30oC hysteresis to lower the average Junction Tempera-ture (TJ) during continuous thermal overload conditions,increasing the lifetime of the device.FNv嘉泰姆

八,相关产品                 更多同类产品......FNv嘉泰姆