• "

样品申请

目录Ku0嘉泰姆

1.产品概述                       2.产品特点Ku0嘉泰姆
3.应用范围                       4.下载产品资料PDF文档 Ku0嘉泰姆
5.产品封装图                     6.电路原理图                   Ku0嘉泰姆
7.功能概述                        8.相关产品Ku0嘉泰姆

 Ku0嘉泰姆

一,产品概述(General Description)      Ku0嘉泰姆

     The CXSD61054 is a fully in tegrated , high-efficiency  2.0A  synchronous  rectified step-down  converter.  The CXSD61054 operates at high efficiencyKu0嘉泰姆
over a wide output current load range.This device offers two operation modes,PWM control and PFM Mode switching control, which allows a highKu0嘉泰姆
efficiency over the wider range of the load.The  rber of readily available standard external components and is available in an 6-pin SOT23 ROHS compliant package.Ku0嘉泰姆

二.产品特点(Features)Ku0嘉泰姆

* High Efficiency: Up to 95%Ku0嘉泰姆
* 600KHz Frequency OperationKu0嘉泰姆
* 2.0A Output CurrentKu0嘉泰姆
* No Schottky Diode RequiredKu0嘉泰姆
* 3.5V to 18V Input Voltage RangeKu0嘉泰姆
* 0.6V ReferenceKu0嘉泰姆
 Slope Compensated Current ModeKu0嘉泰姆
 Control for Excellent Line and LoadKu0嘉泰姆
 Transient ResponseKu0嘉泰姆
* Integrated internal compensationKu0嘉泰姆
* Stable with Low ESR Ceramic OutputKu0嘉泰姆
   CapacitorsKu0嘉泰姆
* Over Current Protection withKu0嘉泰姆
    Hiccup-ModeKu0嘉泰姆
* Input over voltage protection(OVP)Ku0嘉泰姆
*  Thermal ShutdownKu0嘉泰姆
*  Inrush Current Limit and Soft StartKu0嘉泰姆
*  Available in SOT23-6 PackageKu0嘉泰姆
*  -40°C to +85°C Temperature RangeKu0嘉泰姆
三,应用范围 (Applications)Ku0嘉泰姆

Distributed Power SystemsKu0嘉泰姆
Digital Set Top BoxesKu0嘉泰姆
Flat Panel Television and MonitorsKu0嘉泰姆
Wireless and DSL ModemsKu0嘉泰姆
Notebook ComputerKu0嘉泰姆
四.技术规格书下载（产品PDF）Ku0嘉泰姆

需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！Ku0嘉泰姆

 Ku0嘉泰姆

五,产品封装图 (Package)Ku0嘉泰姆

Ku0嘉泰姆
六.电路原理图Ku0嘉泰姆
Ku0嘉泰姆
七,功能概述Ku0嘉泰姆

Internal Regulator Ku0嘉泰姆
The CXSD61054 is a current mode step down DC/DC converter that provides excellentKu0嘉泰姆
transient response with no extra external compensation components. This device containsKu0嘉泰姆
an internal, low resistance, high voltage power MOSFET, and operates at a high 600KKu0嘉泰姆
operating frequency to ensure a compact, high efficiency design with excellent AC and DCKu0嘉泰姆
performance.Ku0嘉泰姆

Error AmplifierKu0嘉泰姆
The error amplifier compares the FB pin voltage with the internal FB reference (VFB) andKu0嘉泰姆
outputs a current proportional to the difference between the two. This output current is thenKu0嘉泰姆
used to charge or discharge the internal compensation network to form the COMP voltage,Ku0嘉泰姆
which is used to control the power MOSFET current. The optimized internal compensationKu0嘉泰姆
network minimizes the external component counts and simplifies the control loop design. Ku0嘉泰姆
Internal Soft-StartKu0嘉泰姆
The soft-start is implemented to prevent the converter output voltage from overshootingKu0嘉泰姆
during startup. When the chip starts, the internal circuitry generates a soft-start voltage (SS)Ku0嘉泰姆
ramping up from 0V to 0.6V. When it is lower than the internal reference (REF), SSKu0嘉泰姆
overrides REF so the error amplifier uses SS as the reference. When SS is higher thanKu0嘉泰姆
REF, REF regains control. The SS time is internally fixed to 1 ms.Ku0嘉泰姆
Over-Current-Protection and HiccupKu0嘉泰姆
The CXSD61054 has cycle-by-cycle over current limit when the inductor current peak valueKu0嘉泰姆
exceeds the set current limit threshold. Meanwhile, output voltage starts to drop until FB isKu0嘉泰姆
below the Under-Voltage (UV) threshold, typically 30% below the reference. Once a UV isKu0嘉泰姆
triggered, the CXSD61054 enters hiccup mode to periodically restart the part. ThisKu0嘉泰姆
protection mode is especially useful when the output is dead-short to ground. The averageKu0嘉泰姆
short circuit current is greatly reduced to alleviate the thermal issue and to protect theKu0嘉泰姆
regulator. The CXSD61054 exits the hiccup mode once the over current condition isKu0嘉泰姆
removed. Ku0嘉泰姆
Startup and Shutdown Ku0嘉泰姆
If both VIN and EN are higher than their appropriate thresholds, the chip starts. TheKu0嘉泰姆
reference block starts first, generating stable reference voltage and currents, and then theKu0嘉泰姆
internal regulator is enabled. The regulator provides stable supply for the remainingKu0嘉泰姆
八,相关芯片选择指南               更多同类产品......Ku0嘉泰姆

◀ 上一篇:CXSD61053 wide input range high efficiency DC step down switching regulator 4A output current Current mode PWM control

返回顶部

下一篇▶: CXSD61055 4.5V to 16V Input Voltage Range Integrated internal compensation 2A Output Current Over Current Protection with Hiccup-Mode