• [ 产品资料下载 ]

样品申请

目录1bY嘉泰姆

1.产品概述                       2.产品特点1bY嘉泰姆
3.应用范围                       4.下载产品资料PDF文档 1bY嘉泰姆
5.产品封装图                     6.电路原理图                   1bY嘉泰姆
7.功能概述                        8.相关产品1bY嘉泰姆

一,产品概述(General Description)         1bY嘉泰姆

          The CXSU63138 is a fixed switching frequency (1.5MHz typical), current-mode,1bY嘉泰姆
step-up regulator with an inte-grated N-channel MOSFET. The device allows the usage1bY嘉泰姆
of small inductors and output capacitors for portable devices. The current-mode control 1bY嘉泰姆

scheme provides fast transient response and good output voltage accuracy. The CXSU63138 includes under-voltage lockout, current-limit, and over-temperature shutdown preventing 1bY嘉泰姆

dam-age in the event of an output overload1bY嘉泰姆
二.产品特点(Features)1bY嘉泰姆

1.)Wide 2.7V to 6V Input Voltage Range1bY嘉泰姆
2.)Built-in 0.2Ω N-Channel MOSFET1bY嘉泰姆
3.)Built-in Soft-Start1bY嘉泰姆
4.)High Efficiency up to 90%1bY嘉泰姆
5.)<1μA Quiescent Current During Shutdown1bY嘉泰姆
6.)Current-Mode Operation1bY嘉泰姆
    Stable with Ceramic Output Capacitors1bY嘉泰姆
    Fast Transient Response1bY嘉泰姆
7.)Current-Limit Protection1bY嘉泰姆
8.)Over-Temperature Protection with Hysteresis1bY嘉泰姆
9.)Available in a TSOT-23-5A and TDFN2x2-6 Pack-age1bY嘉泰姆
10.)Lead Free and Green Devices Available(RoHS Compliant)1bY嘉泰姆
三,应用范围 (Applications)1bY嘉泰姆

Cell Phone and Smart Phone1bY嘉泰姆
PDA, PMP, MP31bY嘉泰姆
Digital Camera1bY嘉泰姆
Boost Regulators1bY嘉泰姆
四.下载产品资料PDF文档 1bY嘉泰姆

需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！1bY嘉泰姆

 1bY嘉泰姆

五,产品封装图 (Package)1bY嘉泰姆

1bY嘉泰姆

六.电路原理图1bY嘉泰姆

1bY嘉泰姆
1bY嘉泰姆

1bY嘉泰姆

七,功能概述1bY嘉泰姆

Main Control Loop1bY嘉泰姆
The CXSU63138 is a constant frequency and current-mode switching regulator. In normal operation, the internal 1bY嘉泰姆

N-channel power MOSFET is turned on each cycle when the oscillator sets an internal RS latch,1bY嘉泰姆

 and then turned off when an internal comparator (ICMP) resets the latch. The peak inductor 1bY嘉泰姆

current at which ICMP resets the RS latch is controlled by the voltage on the COMP node which1bY嘉泰姆

is the output of the error amplifier (EAMP). An external resis-tive divider connected between 1bY嘉泰姆

VOUT and ground allows the EAMP to receive an output feedback voltage VFB at FB pin. When1bY嘉泰姆

the load current increases, it causes a slightly to decrease in VFB associated with the 1.23V1bY嘉泰姆

reference,which in turn, it causes the COMP voltage to increase until the average inductor 1bY嘉泰姆

current matches the new load current. 1bY嘉泰姆

VIN Under-Voltage Lockout (UVLO)1bY嘉泰姆
The Under-Voltage Lockout (UVLO) circuit compares the input voltage at VIN with the UVLO1bY嘉泰姆

 threshold to ensure the input voltage is high enough for reliable operation.The 100mV (typ) 1bY嘉泰姆

hysteresis prevents supply transients from causing a restart. Once the input voltage exceeds 1bY嘉泰姆

the UVLO rising threshold, startup begins. When the in-put voltage falls below the UVLO falling1bY嘉泰姆

 threshold, the controller turns off the converter.1bY嘉泰姆
Soft-Start1bY嘉泰姆
The CXSU63138 has a built-in soft-start to control the output voltage rise during start-up. During soft-start, an1bY嘉泰姆

 internal ramp voltage, connected to the one of the positive inputs of the error amplifier, raises up to replace the 1bY嘉泰姆

reference voltage (1.23V typical) until the ramp voltage reaches the reference voltage.1bY嘉泰姆
Current-Limit Protection1bY嘉泰姆
The CXSU63138 monitors the inductor current, flows through the N-channel MOSFET, and limits1bY嘉泰姆

 the current peak at current-limit level to prevent loads and the CXSU63138 from damaging during overload or 1bY嘉泰姆

short-circuit conditions.1bY嘉泰姆

Over-Temperature Protection (OTP)1bY嘉泰姆
The over-temperature circuit limits the junction tempera-ture of the CXSU63138. When the 1bY嘉泰姆

junction temperature  ex-ceeds 150 oC, a thermal sensor turns off the power MOSFET allowing1bY嘉泰姆

 the devices to cool. The thermal sen-sor allows the converters to start a soft-start process and 1bY嘉泰姆

regulates the output voltage again after the junction tem-perature cools by 40oC. The OTP is designed 1bY嘉泰姆

with a 40oC hysteresis to lower the average Junction Temperature (TJ) during continuous thermal overload1bY嘉泰姆

 conditions in-creasing the lifetime of the device. 1bY嘉泰姆

Enable/Shutdown1bY嘉泰姆
Driving EN to the ground places the CXSU63138 in shut-down mode. When in shutdown, the internal power1bY嘉泰姆
MOSFET turns off, all internal circuitry shuts down, and the quiescent supply current reduces to 1μA maximum.1bY嘉泰姆
八,相关产品              更多同类产品......1bY嘉泰姆

1bY嘉泰姆

◀ 上一篇:2.6V至6.5V输入电源VGON和VGOFF的线性调节器控制器CXSU63137电流模式升压调节器大电流运算放大器

返回顶部

下一篇▶:固定1.2兆赫振荡器频率同步整流器CXSU63139低ESR输出电容稳定电流模式升压调节器92%效率

共有条评论 用户名: 密码: 验证码: 匿名发表