White LED Charge Pump Current Source with PWM Brightness Control CXLE8177 ideally suited for all applications powered by a single Li-ion battery cell or three to four NiCd, NiMH, or alkaline battery

   产品概述 返回TOPGQt嘉泰姆

The CXLE8177 is a charge pump with PWM brightness control for white LED supplies in LCD display backlight applications. The supply voltage ranges from 2.7V to 5.5V, it is ideally suited for all applications powered by a single Li-ion battery cell or three to four NiCd, NiMH, or alkaline battery cells.GQt嘉泰姆

GQt嘉泰姆

The device provides a constant current for each LED, and the initial current value can be set by an external resistor. High efficiency is achieved by utilizing a 1×/1.5× fractional conversion technique in combination with very low dropout current sources.GQt嘉泰姆

GQt嘉泰姆

The CXLE8177 is capable of driving up to three channels of LEDs at 30mA per channel from a 2.7V to 5.5V input. Additionally, the current controlled charge pump ensures low input current ripple and EMI. A low external part count (two 0.47μF flying capacitors and two small 1μF capacitors at VIN and VOUT) makes this part ideally suited for small, battery-powered applications.GQt嘉泰姆

GQt嘉泰姆

The CXLE8177 is available in a Green, space-saving TQFN-3×3-16L package, and is rated over the -40℃</span> to +85℃</span> temperature range.GQt嘉泰姆

   产品特点 返回TOPGQt嘉泰姆

• Input Voltage Range: 2.7V to 5.5V
• Drives up to 3 LEDs at 30mA Each
• LED Brightness Control Through PWM Control Signal
• High Efficiency by Fractional Conversion with 1×
    and 1.5× Modes
• Switching Frequency: 1MHz
• Regulated Output Current with 0.5% Matching
• Internal Soft-Start Limits Inrush Current
• Low Input Ripple and Low EMI
• Over-Current and Over-Temperature Protection
• Under-Voltage Lockout with Hysteresis
• Green TQFN-3×3-16L PackageGQt嘉泰姆

   应用范围 返回TOPGQt嘉泰姆

Cellular Phones
Smart Phones
Digital Cameras
Handheld PCs
Camcorders
PDAs
Keypad BacklightGQt嘉泰姆

   技术规格书（产品PDF) 返回TOP GQt嘉泰姆

     需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持</span>！</span>
GQt嘉泰姆