500kHz, 18μA, Rail-to-Rail I/O CMOS Operational Amplifiers CXAO42116 (single) rail-to-rail input and output voltage feedback amplifiers offering low cost, rail-to-rail input and output voltage feedb

   产品概述 返回TOPisq嘉泰姆

The CXAO42116 (single), CXAO42117 (dual) and CXAO42118 (quad) are rail-to-rail input and output voltage feedback amplifiers offering low cost, rail-to-rail input and output voltage feedback amplifiers. They have a wide input common mode voltage range and output voltage swing, and take the minimum operating supply voltage down to 2.1V. The maximum recommended supply voltage is 5.5V. All are specified over the extended -40℃</span> to +125℃</span> temperature range.The CXAO42116/7/8 provide 500kHz bandwidth at a low current consumption of 18μA per amplifier. Very low input bias currents of 0.5pA enable the CXAO42116/2/4 to be used for integrators, photodiode amplifiers, and piezoelectric sensors. Rail-to-rail inputs and outputs are useful to designers buffering ASIC in single-supply systems.Applications for these amplifiers include safety monitoring, portable equipment, battery and power supply control, and signal conditioning and interfacing for transducers in very low power systems.The CXAO42116 is available in the Green SOT-23-5 and SOIC-8 packages. The CXAO42117 comes in the Green SOIC-8 and MSOP-8 packages. The CXAO42118 quad is offered in Green TSSOP-14 and SOIC-14 packages.The CXAO42116 (single), CXAO42117 (dual) and CXAO42118 (quad) are rail-to-rail input and output voltage feedback amplifiers offering low cost, rail-to-rail input and output voltage feedback amplifiers. They have a wide input common mode voltage range and output voltage swing, and take the minimum operating supply voltage down to 2.1V. The maximum recommended supply voltage is 5.5V. All are specified over the extended -40℃</span> to +125℃</span> temperature range.The CXAO42116/7/8 provide 500kHz bandwidth at a low current consumption of 18μA per amplifier. Very low input bias currents of 0.5pA enable the CXAO42116/2/4 to be used for integrators, photodiode amplifiers, and piezoelectric sensors. Rail-to-rail inputs and outputs are useful to designers buffering ASIC in single-supply systems.Applications for these amplifiers include safety monitoring, portable equipment, battery and power supply control, and signal conditioning and interfacing for transducers in very low power systems.The CXAO42116 is available in the Green SOT-23-5 and SOIC-8 packages. The CXAO42117 comes in the Green SOIC-8 and MSOP-8 packages. The CXAO42118 quad is offered in Green TSSOP-14 and SOIC-14 packages.isq嘉泰姆

   产品特点 返回TOPisq嘉泰姆

isq嘉泰姆

• Low Cost 
• Rail-to-Rail Input and Output 
   0.8mV Typical V_OS 
• Gain-Bandwidth Product: 500kHz 
• Very Low Input Bias Current: 0.5pA 
• Supply Voltage Range: 2.1V to 5.5V 
• Input Voltage Range: -0.1V to +5.6V with V_S = 5.5V 
• Low Supply Current: 18μA/Amplifier 
• Small Packaging 
   CXAO42116 Available in SOIC-8 and SOT-23-5
   CXAO42117 Available in SOIC-8 and MSOP-8isq嘉泰姆

   CXAO42118 Available in SOIC-14 and TSSOP-14isq嘉泰姆

   应用范围 返回TOPisq嘉泰姆

isq嘉泰姆

ASIC Input or Output Amplifier          isq嘉泰姆

Sensor Interface                  isq嘉泰姆

Piezo Electric Transducer Amplifier     isq嘉泰姆

Medical Instrumentation                    isq嘉泰姆

Mobile Communication         isq嘉泰姆

Audio Output                   isq嘉泰姆

Portable Systemsisq嘉泰姆

Smoke Detectors                    isq嘉泰姆

Mobile Telephone                   isq嘉泰姆

Notebook PC                        isq嘉泰姆

PCMCIA Cards                                isq嘉泰姆

Battery-Powered Equipmentisq嘉泰姆

   技术规格书（产品PDF) 返回TOP isq嘉泰姆

     需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持</span>！</span>
isq嘉泰姆