CXLS4261 CXLS4262是负载开关提供95mΩ限流开关在2.5-5.5V的输入电压范围内运行电流限制可外部编程通过精确的电阻范围从75mA到1.4A开关控制通过逻辑输入EN能力直接与低压控制信号接口

CXLS4261 CXLS4262是一种负载开关，它为以下系统和负载提供全面保护可能遇到大电流情况。CXLS4261 CXLS4262提供95mΩ限流开关，可以在2.5-5.5V的输入电压范围内运行。电流限制可外部编程通过一个精确的电阻，范围从75mA到1.4A。开关控制通过一个逻辑输入（EN）能力直接与低压控制信号接口。当开关断开，输出电压高于输入电压。CXLS4261 CXLS4262还具有热关机保护，在连续工作时关闭开关以防止损坏部件电流过大会导致过热。当开关电流达到电流极限时，部件以恒流模式运行，以防止过大电流造成损坏。
在电流限制故障后，CXLS4261 CXLS4262不会关闭，而是保持恒定
当前模式无限期。在过电流和反向电压条件下，nFAULT输出认定为低。

目录

1.产品概述       2.产品特点     3.应用范围      4.技术规格书下载（产品PDF文档） 
5.产品封装图   6.电路原理图  7.功能概述      8.相关产品

一,产品概述(General Description)     
 

      The CXLS4261 CXLS4262 is a load switch which provides full protection to systems and loads which 

may encounter large current conditions. CXLS4261 CXLS4262 offers a 95mΩ current‐limited switch which can 

operate over an input voltage range of 2.5‐5.5V. The current limit can be externally programmed 

by a precision resistor, ranges from 75mA to 1.4A.Switch control is by a logic input (EN) capable

 of interfacing directly with low voltage control signals. Current is prevented from flowing when 

the switch is off and the output voltage is higher than the input voltage. CXLS4261 CXLS4262 also features

thermal shutdown protection which shuts off the switch to prevent damage to the part when acontinuous 

over‐current condition causes excessive heating. When the switch current reaches the current limit,

the parts operate in a constant‐current mode to prohibit excessive currents from causing damage. 

The CXLS4261 CXLS4262 will not turn off after a current limit fault, but will rather remain in the constant 

current mode indefinitely. The nFAULT output asserts low during over‐current and reverse‐voltage conditions. 

   CXLS4261 CXLS4262 is housed in a tiny DFN2x2‐6L package

二.产品特点(Features)

Up to 1.4A Max Load current

Accurate Current‐limit threshold: +/‐5%  

Programmable Current‐limit : 75mA to 1.4A

Fast Over‐Current Response

Fault Flag Output: nFAULT Pin

Reversed Current blocking

Thermal Shutdown, UVLO protection

Tiny DFN2x2‐6L  、SOT23‐6 Package

三,应用范围 (Applications)

USB ports/Hubs

Hot Swaps

Cellphones

Tablet PC

Set Top Box

PC motherboard

Handheld Devices

四.技术规格书下载（产品PDF）

需要详细的PDF规格书请扫一扫微信联系我们

                        

五,产品封装图 (Package)

六.电路原理图

七,相关芯片选择指南

精密限流负载开关(Load Switch)
Part No.	Features	VIN	IQ	Current Limit Threshold	Power switch On Resistance	Package	Application
CXLS4261	Reverse Voltage Protection, OTP, UVLO, Faultflag Output	2.5~5.5V	120μA	75mA~1.7A	95mΩ	DFN2X2-6L	STB,MID
CXLS4262	Reverse Voltage Protection, OTP, UVLO	2.5~5.5V	150μA	Max. 1.5A	250mΩ	SOT23-5	STB,MID
CXLS4263	启动延时电路	2~12V	350μA	1mA	300Ω@Vin=6V	SOT23-6	玩具